TOC Analyzer QuickTOCuv™

TOC Analyzer for Clean and Pure Water

QuickTOCuv™ is an online measurement system for the determination of total organic carbon (TOC) and the dissolved organic carbon (DOC) in pure, drinking, surface and wastewater.

Features and Benefits

  • Measurement range: 0,1 – 1,0 mg/l, 0,5 – 10 mg/l, 1 – 50 mg/l, 10 – 100 mg/l, 50 – 500 mg/l, 100 – 1,000 mg/l
  • Recognized UV persulphate method
  • Continuous determination of TOC, TC, NPOC, DOC
  • Accuracy of +/- 2 %
  • Auto-calibration
  • Automatic system check (zero point correction, sensitivity)
  • Reduced consumption of chemicals
  • Certified housing for EX zones (EX p) (options for ATEX, IECEx, etc.)
  • Analyser availability of minim. 98%
  • Maintenance and service max. 15 minutes/ week
  • Very low operating and maintenance costs
product picture TOC Analyzer QuickTOCuv


Total organic carbon (TOC) analyzer suitable for:

  • Ultra pure water
  • Drinking water
  • Surface water
  • Wastewater


The measurement system is very adaptable for many measurement challenges:

  • Dual stream measurement
  • Ambient air preparation unit
  • CO2-remover
  • Humidity sensor
  • Pressure sensor


For safe operation in hazardous areas, there are different protection housings available:

  • IP54 (Standard)
  • NEMA 4X
  • ATEX Zone I
  • ATEX Zone II
  • IECEx

Continuous TOC determination Using the UV persulphate method

QuickTOCuv is an online measuring system that determines the parameter TOC using the UV persuphate method. In addition, different versions of the measuring device can be supplied and it can thus also be used in Ex zones. TOC determination is carried out in accordance with the standards DIN EN 1484:1997 and US-EPA 415.2.

Accurate. Reliable. Trusted Measurement.

QuickTOCuv process controls have been optimized for high performance. Additional sensors and carrier gas preparation are optional. Reliable operation is guaranteed by the separation of the analytical compartment from the electronics and by the use of high-quality materials.

System Validation. 

QuickTOCuv automatically carries out regular checks to assess correct function of NDIR detector by zero point correction and sensitivity tests. This ensures that any deviations are rapidly detected and guarantees precise results.

Measurement principle of QuickTOCuv



LAR Process Analysers

TOC-Analyzer for the Rough Stuff


LAR Process Analysers

TOC-Analyzer for Pure Water

QuickTOCuv II™

LAR Process Analysers

TOC-Analyzer for Clean Water


LAR Process Analysers

TOC-Analyzer for (Ultra-)Pure Water


LAR Process Analysers

COD-Analyzer for the Rough Stuff


LAR Process Analysers

COD-Analyzer for Laboratories


LAR Process Analysers

BOD Analyzer for Controlling WWTPs


LAR Process Analysers

Toximeter for WWTP protection


LAR Process Analysers

Toximeter for Drinking Water and Surface Water


LAR Process Analysers

TNb-Analyzer for the Rough Stuff


LAR Process Analysers

Municipal wastewater  – including cooling water

Type 81 and 82™


High-precision relative humidity and temperature meter (hygrometer) for industrial use. 

Type 83™


Closed loop relative humidity and temperature meter (hygrometer) for industrial use. 

Type 85™


Relative humidity and temperature meter (hygrometer) for industrial use. 

Request for Quote